/*format =2*/

/*ECU Created/Edited by GMECM Edit*/


/* General */

{
/*ecuId                     =89 165 ECM 32B,
/*fileSize                  =4000,
/*checkSumAddr              =6,
/*checkSumSize              =2,
/*checkSumStartAddr         =8,
/*checkSumEndAddr           =3FFF,
/*Items                     =68,,
};


/* Items */

/* ***Constants*** */

/* Constant 1: Prom ID */
{
/*startAddr                 =0,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =2,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =2,
/*factor                    =1.000000,
/*map_name                  =Prom ID,
/*ylabel                    = ,
/*yaxis                     = ,
/*xlabel                    = ,
/*xaxis                     = ,,
};

/* Constant 2: Checksum */
{
/*startAddr                 =6,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =2,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =2,
/*factor                    =1.000000,
/*map_name                  =Checksum,
/*ylabel                    = ,
/*yaxis                     = ,
/*xlabel                    = ,
/*xaxis                     = ,,
};

/* Constant 3: Number of Cylinders $00=8 $C0=6 $80=4 */
{
/*startAddr                 =9,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =2,
/*factor                    =1.000000,
/*map_name                  =Number of Cylinders $00=8 $C0=6 $80=4,
/*ylabel                    = ,
/*yaxis                     = ,
/*xlabel                    = ,
/*xaxis                     = ,,
};

/* Constant 4: Maximum Knock Retard Degrees When Not In PE */
{
/*startAddr                 =1C8,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.175809,
/*map_name                  =Maximum Knock Retard Degrees When Not In PE,
/*ylabel                    =,
/*yaxis                     =Degrees,
/*xlabel                    =,
/*xaxis                     =,,
};

/* Constant 5: Fan 1 Turn On (AC On) */
{
/*startAddr                 =2FA,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =-49.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.398000,
/*map_name                  =Fan 1 Turn On (AC On),
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =Deg F,
/*xaxis                     =,,
};

/* Constant 6: Fan 1 Turn Off (AC On) */
{
/*startAddr                 =2FB,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =-49.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.398000,
/*map_name                  =Fan 1 Turn Off (AC On),
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =Deg F,
/*xaxis                     =,,
};

/* Constant 7: Fan 2 Turn On (AC Off) */
{
/*startAddr                 =2FC,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =-49.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.398000,
/*map_name                  =Fan 2 Turn On (AC Off),
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =Deg F,
/*xaxis                     =,,
};

/* Constant 8: Fan 2 Turn Off (AC Off) */
{
/*startAddr                 =2FD,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =-49.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.398000,
/*map_name                  =Fan 2 Turn Off (AC Off),
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =Deg F,
/*xaxis                     =,,
};

/* Constant 9: Minimum LV8 to Enable Power Enrichment */
{
/*startAddr                 =342,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =Minimum LV8 to Enable Power Enrichment,
/*ylabel                    =LV8,
/*yaxis                     =,
/*xlabel                    =LV8,
/*xaxis                     =,,
};

/* Constant 10: Single Fire FI Size @ 40 psig */
{
/*startAddr                 =3D6,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =2,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =1,
/*factor                    =10158.800000,
/*map_name                  =Single Fire FI Size @ 40 psig,
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =Lbs/Hr,
/*xaxis                     =,,
};

/* Constant 11: Double Fire FI Size @ 40 psig */
{
/*startAddr                 =3D8,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =2,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =1,
/*factor                    =20317.600000,
/*map_name                  =Double Fire FI Size @ 40 psig,
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =Lbs/Hr,
/*xaxis                     =,,
};

/* Constant 12: Spark Reference Angle - Base Timing */
{
/*startAddr                 =1C,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.351567,
/*map_name                  =Spark Reference Angle - Base Timing,
/*ylabel                    =Adv,
/*yaxis                     =,
/*xlabel                    =Degrees,
/*xaxis                     =,,
};

/* Constant 13: Maximum Spark Advance */
{
/*startAddr                 =1E,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.351567,
/*map_name                  =Maximum Spark Advance,
/*ylabel                    =Adv,
/*yaxis                     =,
/*xlabel                    =Degrees,
/*xaxis                     =,,
};

/* Constant 14: Stop Fuel - MPH */
{
/*startAddr                 =3AC,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =Stop Fuel - MPH,
/*ylabel                    =MPH,
/*yaxis                     =,
/*xlabel                    =MPH,
/*xaxis                     =,,
};

/* Constant 15: Re-Start Fuel After Cut - MPH */
{
/*startAddr                 =3AF,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =Re-Start Fuel After Cut - MPH,
/*ylabel                    =MPH,
/*yaxis                     =,
/*xlabel                    =MPH,
/*xaxis                     =,,
};

/* Constant 16: RPM */
{
/*startAddr                 =3AD,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =2,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =1,
/*factor                    =983600.000000,
/*map_name                  =RPM,
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =,
/*xaxis                     =,,
};

/* Constant 17: Rev Limit - Start Fuel */
{
/*startAddr                 =3B0,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =2,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =1,
/*factor                    =983600.000000,
/*map_name                  =Rev Limit - Start Fuel,
/*ylabel                    =RPM,
/*yaxis                     =,
/*xlabel                    =,
/*xaxis                     =,,
};

/* Constant 18: MPH LOW SPEED LIMIT FOR LOW GEAR LOCK TO UNLOCK TRANSITION */
{
/*startAddr                 =2A6,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =MPH LOW SPEED LIMIT FOR LOW GEAR LOCK TO UNLOCK TRANSITION,
/*ylabel                    =MPH,
/*yaxis                     =,
/*xlabel                    =MPH,
/*xaxis                     =,,
};

/* Constant 19: MPH LOW SPEED LIMIT FOR LOW GEAR UNLOCK TO LOCK TRANSITION */
{
/*startAddr                 =2B3,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =MPH LOW SPEED LIMIT FOR LOW GEAR UNLOCK TO LOCK TRANSITION,
/*ylabel                    =MPH,
/*yaxis                     =,
/*xlabel                    =MPH,
/*xaxis                     =,,
};

/* Constant 20: MPH LOW SPEED LIMIT FOR HIGH GEAR LOCK TO UNLOCK TRANSITION */
{
/*startAddr                 =2C0,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =MPH LOW SPEED LIMIT FOR HIGH GEAR LOCK TO UNLOCK TRANSITION,
/*ylabel                    =MPH,
/*yaxis                     =,
/*xlabel                    =MPH,
/*xaxis                     =,,
};

/* Constant 21: MPH LOW SPEED LIMIT FOR HIGH GEAR UNLOCK TO LOCK TRANSITION */
{
/*startAddr                 =2CD,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =MPH LOW SPEED LIMIT FOR HIGH GEAR UNLOCK TO LOCK TRANSITION,
/*ylabel                    =MPH,
/*yaxis                     =,
/*xlabel                    =MPH,
/*xaxis                     =,,
};

/* Constant 22: Hot O2 Closed Loop Timer */
{
/*startAddr                 =55D,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =2.000000,
/*map_name                  =Hot O2 Closed Loop Timer,
/*ylabel                    =Sec,
/*yaxis                     =,
/*xlabel                    =Seconds,
/*xaxis                     =,,
};

/* Constant 23: Warm O2 Closed Loop Timer */
{
/*startAddr                 =55C,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =2.000000,
/*map_name                  =Warm O2 Closed Loop Timer,
/*ylabel                    =Sec,
/*yaxis                     =,
/*xlabel                    =Seconds,
/*xaxis                     =,,
};

/* Constant 24: Cold O2 Closed Loop Timer */
{
/*startAddr                 =55B,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =2.000000,
/*map_name                  =Cold O2 Closed Loop Timer,
/*ylabel                    =Sec,
/*yaxis                     =,
/*xlabel                    =Seconds,
/*xaxis                     =,,
};

/* Constant 25: EGR Enable if TPS > X & EGR Duty Cycle!=0 */
{
/*startAddr                 =246,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.390625,
/*map_name                  =EGR Enable if TPS > X & EGR Duty Cycle!=0,
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =%TPS,
/*xaxis                     =,,
};

/* Constant 26: EGR Enable if TPS > X & EGR Duty Cycle=0 */
{
/*startAddr                 =247,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.390625,
/*map_name                  =EGR Enable if TPS > X & EGR Duty Cycle=0,
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =%TPS,
/*xaxis                     =,,
};

/* Constant 27: Idle Speed adder A/C Enabled */
{
/*startAddr                 =63B,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =12.500000,
/*map_name                  =Idle Speed adder A/C Enabled,
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =RPM,
/*xaxis                     =,,
};

/* Constant 28: Idle Speed adder Park/Neutral */
{
/*startAddr                 =639,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =12.500000,
/*map_name                  =Idle Speed adder Park/Neutral,
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =RPM,
/*xaxis                     =,,
};

/* Constant 29: MAF High Diag Err. Threshold */
{
/*startAddr                 =211,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =MAF High Diag Err. Threshold,
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =gm/sec,
/*xaxis                     =,,
};

/* Constant 30: Max Enrich Async Pulse Width */
{
/*startAddr                 =318,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.015259,
/*map_name                  =Max Enrich Async Pulse Width,
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =msec,
/*xaxis                     =,,
};

/* Constant 31: Minimum Delta TPS For Accel Enrich */
{
/*startAddr                 =314,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.390625,
/*map_name                  =Minimum Delta TPS For Accel Enrich,
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =% TPS,
/*xaxis                     =,,
};

/* Constant 32: Minimum Delta LV8 For Accel Enrich */
{
/*startAddr                 =342,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =Minimum Delta LV8 For Accel Enrich,
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =counts,
/*xaxis                     =,,
};

/* Constant 33: Minimum BLM Value */
{
/*startAddr                 =5E8,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =Minimum BLM Value,
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =,
/*xaxis                     =,,
};

/* Constant 34: Maximum BLM Value */
{
/*startAddr                 =5E7,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =Maximum BLM Value,
/*ylabel                    =,
/*yaxis                     =,
/*xlabel                    =,
/*xaxis                     =,,
};

/* ***Flags*** */

/* Flag 1: Vats & Tranny Type Flags */
{
/*startAddr                 =14,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =80,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =Vats & Tranny Type Flags,
/*ylabel                    =Option,
/*yaxis                     =b7   b6   b5   VATS b3   b2   b1   b0,
/*xlabel                    =Enabled,
/*xaxis                     = ,,
};

/* Flag 2: A/C Pressure Switch Specification Byte */
{
/*startAddr                 =17,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =80,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =A/C Pressure Switch Specification Byte,
/*ylabel                    =Option,
/*yaxis                     =b7   b6   N/O  b4   b3   b2   b1   b0,
/*xlabel                    =Enabled,
/*xaxis                     = ,,
};

/* Flag 3: VATS & KNOCK Sensor Diag. */
{
/*startAddr                 =1DF,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =80,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =VATS & KNOCK Sensor Diag.,
/*ylabel                    =Option,
/*yaxis                     =b7   b6   b5   KNOCKb3   b2   VATS  b0,
/*xlabel                    =Enabled,
/*xaxis                     = ,,
};

/* Flag 4: VSS & EGR & MAF Diag. */
{
/*startAddr                 =1DE,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =80,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =VSS & EGR & MAF Diag.,
/*ylabel                    =Option,
/*yaxis                     =VSS  b6   b5   b4   EGR  MAF  b1   b0,
/*xlabel                    =Enabled,
/*xaxis                     = ,,
};

/* Flag 5: Base PW Calc Method */
{
/*startAddr                 =16,
/*columns                   =1,
/*rows                      =1,
/*elementSize               =1,
/*bitMask                   =80,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =Base PW Calc Method,
/*ylabel                    =Option,
/*yaxis                     =b7   PW   b5   b4   b3   b2   b1   b0,
/*xlabel                    =Enabled,
/*xaxis                     = ,,
};

/* ***Tables*** */

/* Table 1: Spark Advance Table */
{
/*startAddr                 =30,
/*columns                   =12,
/*rows                      =17,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.351567,
/*map_name                  =Spark Advance Table,
/*ylabel                    =RPM,
/*yaxis                     =  400  600  800 1000 1200 1400 1600 1800 2000 2200 2400 2800 3200 3600 4000 4400 4800,
/*xlabel                    =Load Variable LV8,
/*xaxis                     = 32 48 64 80 96112128144160176192208,,
};

/* Table 2: Spark Correction - LV8/2 vs Coolant Temp */
{
/*startAddr                 =10F,
/*columns                   =9,
/*rows                      =12,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.351567,
/*map_name                  =Spark Correction - LV8/2 vs Coolant Temp,
/*ylabel                    =Deg F,
/*yaxis                     =    3   24   46   68   90  111  132  154  176  198  219  241,
/*xlabel                    =Load Variable LV8,
/*xaxis                     = 32 48 64 80 96112128144160,,
};

/* Table 3: Power Enrichment Mode Spark Advance */
{
/*startAddr                 =187,
/*columns                   =1,
/*rows                      =5,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.351567,
/*map_name                  =Power Enrichment Mode Spark Advance,
/*ylabel                    =RPM,
/*yaxis                     =  400 1200 2000 3200 4800,
/*xlabel                    =Degrees,
/*xaxis                     = ,,
};

/* Table 4: RPM */
{
/*startAddr                 =1D5,
/*columns                   =1,
/*rows                      =8,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.175781,
/*map_name                  =RPM,
/*ylabel                    =RPM,
/*yaxis                     = ,
/*xlabel                    =Degrees,
/*xaxis                     =,,
};

/* Table 5: Cooling Fan Duty Cycle Vs Coolant Temp øF */
{
/*startAddr                 =2FE,
/*columns                   =1,
/*rows                      =7,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.390625,
/*map_name                  =Cooling Fan Duty Cycle Vs Coolant Temp øF,
/*ylabel                    =Degrees F,
/*yaxis                     =  176  198  219  241  262  284  304,
/*xlabel                    =Fan %,
/*xaxis                     =,,
};

/* Table 6: Open Loop AFR % Change Vs Load */
{
/*startAddr                 =3DA,
/*columns                   =1,
/*rows                      =17,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.390625,
/*map_name                  =Open Loop AFR % Change Vs Load,
/*ylabel                    =LV8,
/*yaxis                     =    0   16   32   48   64   80   96  112  128  144  160  176  192  208  224  240  256,
/*xlabel                    =Percent Change to AFR,
/*xaxis                     =,,
};

/* Table 7: Power Enrichment vs Temp */
{
/*startAddr                 =619,
/*columns                   =1,
/*rows                      =9,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.390625,
/*map_name                  =Power Enrichment vs Temp,
/*ylabel                    =Deg F,
/*yaxis                     =  -40    3    8   46  133  176  219  262  304,
/*xlabel                    =Percent Enrichment,
/*xaxis                     =,,
};

/* Table 8: Acceleration Enrichment Factor vs Change in LV8 */
{
/*startAddr                 =358,
/*columns                   =1,
/*rows                      =5,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.390625,
/*map_name                  =Acceleration Enrichment Factor vs Change in LV8,
/*ylabel                    =LV8,
/*yaxis                     =    0   64  128  192  256,
/*xlabel                    =Factor - Divide by 10 ,
/*xaxis                     = ,,
};

/* Table 9: Acceleration Enrichment Decay Factor vs Coolant Temp */
{
/*startAddr                 =32E,
/*columns                   =1,
/*rows                      =9,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.390625,
/*map_name                  =Acceleration Enrichment Decay Factor vs Coolant Temp,
/*ylabel                    =Degrees F,
/*yaxis                     =  -40    3    8   46  133  176  219  262  304,
/*xlabel                    =% Change - Div by 100,
/*xaxis                     =,,
};

/* Table 10: Power Enrichment vs RPM */
{
/*startAddr                 =622,
/*columns                   =1,
/*rows                      =17,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =-100.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.781225,
/*map_name                  =Power Enrichment vs RPM,
/*ylabel                    =RPM,
/*yaxis                     =    0  400  800 1200 1600 2000 2400 2800 3200 3600 4000 4400 4800 5200 5600 6000 6400,
/*xlabel                    =PE,
/*xaxis                     =,,
};

/* Table 11: MAF Table #1 */
{
/*startAddr                 =6A5,
/*columns                   =1,
/*rows                      =9,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.089800,
/*map_name                  =MAF Table #1,
/*ylabel                    =Volts,
/*yaxis                     =00.0000.1800.3700.5500.7300.9101.1001.2801.46,
/*xlabel                    =Grams/sec,
/*xaxis                     =,,
};

/* Table 12: MAF Table #2 */
{
/*startAddr                 =6B0,
/*columns                   =1,
/*rows                      =9,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.187500,
/*map_name                  =MAF Table #2,
/*ylabel                    =Volts,
/*yaxis                     =01.4601.5501.6501.7401.8301.9202.0102.2002.19,
/*xlabel                    =Grams/sec,
/*xaxis                     =,,
};

/* Table 19: MAF Table #3 */
{
/*startAddr                 =6BB,
/*columns                   =1,
/*rows                      =9,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.324200,
/*map_name                  =MAF Table #3,
/*ylabel                    =Volts,
/*yaxis                     =02.1902.2902.3802.4702.5602.6502.7402.8302.93,
/*xlabel                    =Grams/sec,
/*xaxis                     =,,
};

/* Table 14: MAF Table #4 */
{
/*startAddr                 =6C6,
/*columns                   =1,
/*rows                      =9,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.527300,
/*map_name                  =MAF Table #4,
/*ylabel                    =Volts,
/*yaxis                     =02.9303.0203.1103.2003.2903.3803.4703.5703.66,
/*xlabel                    =Grams/sec,
/*xaxis                     =,,
};

/* Table 15: MAF Table #5 */
{
/*startAddr                 =6D1,
/*columns                   =1,
/*rows                      =9,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.80860,
/*map_name                  =MAF Table #5,
/*ylabel                    =Volts,
/*yaxis                     =03.6603.7503.8403.9304.0204.1104.2104.3004.39,
/*xlabel                    =Grams/sec,
/*xaxis                     =,,
};

/* Table 16: MAF Table #6 */
{
/*startAddr                 =6DC,
/*columns                   =1,
/*rows                      =17,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.9961,
/*map_name                  =MAF Table #6,
/*ylabel                    =Volts,
/*yaxis                     =04.3904.4304.4804.5204.5704.6204.6604.7104.7504.8004.8504.8904.9404.9805.0305.0705.12,
/*xlabel                    =Grams/sec,
/*xaxis                     =,,
};

/* Table 17: Idle RPM vs Coolant Temperature */
{
/*startAddr                 =63C,
/*columns                   =1,
/*rows                      =17,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =12.500000,
/*map_name                  =Idle RPM vs Coolant Temperature,
/*ylabel                    =Deg F,
/*yaxis                     =  -40  -18    3   24   46   68   90  111  132  154  176  198  219  241  262  284  304,
/*xlabel                    =RPM,
/*xaxis                     = ,,
};

/* Table 18: Open Loop AFR Ratio % Change vs. Cooolant Temp */
{
/*startAddr                 =426,
/*columns                   =1,
/*rows                      =14,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.390625,
/*map_name                  =Open Loop AFR Ratio % Change vs. Cooolant Temp,
/*ylabel                    =Deg C,
/*yaxis                     =  -40  -28  -16   -4    8   20   32   44   56   68   80   92  104  116,
/*xlabel                    =% AFR,
/*xaxis                     =,,
};

/* Table 19: Warm IAC Park (Steps) vs Coolant */
{
/*startAddr                 =697,
/*columns                   =1,
/*rows                      =9,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =Warm IAC Park (Steps) vs Coolant,
/*ylabel                    =Deg C,
/*yaxis                     =  -40  -16    8   32   56   80  104  128  152,
/*xlabel                    =steps,
/*xaxis                     =,,
};

/* Table 20: Injector Pulse Width Correction vs Battery Voltage */
{
/*startAddr                 =3B2,
/*columns                   =1,
/*rows                      =17,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =30.518000,
/*map_name                  =Injector Pulse Width Correction vs Battery Voltage,
/*ylabel                    =VDC,
/*yaxis                     =  0.0  1.6  3.2  4.8  6.4  8.0  9.6 11.2 12.8 14.4 16.0 17.6 19.2 20.8 22.4 24.0 25.6,
/*xlabel                    =usec added,
/*xaxis                     =,,
};

/* Table 21: %TPS To Enable WOT vs RPM */
{
/*startAddr                 =613,
/*columns                   =1,
/*rows                      =5,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.390625,
/*map_name                  =%TPS To Enable WOT vs RPM,
/*ylabel                    =% TPS,
/*yaxis                     =  400 1200 2000 3200 4800,
/*xlabel                    =RPM,
/*xaxis                     =,,
};

/* Table 22: BPW Fuel Vs. Load (msec) */
{
/*startAddr                 =437,
/*columns                   =17,
/*rows                      =17,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.076259,
/*map_name                  =BPW Fuel Vs. Load (msec),
/*ylabel                    =RPM,
/*yaxis                     =    0  400  800 1200 1600 2000 2400 2800 3200 3600 4000 4400 4800 5200 5600 6000 6400,
/*xlabel                    =gm/sec,
/*xaxis                     =  0 16 32 48 64 80 96112128144160176192208224240256,,
};

/* Table 23: TCC Unlock Speed Vs. %TPS (Not In 4th) */
{
/*startAddr                 =2A7,
/*columns                   =1,
/*rows                      =12,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.390625,
/*map_name                  =TCC Unlock Speed Vs. %TPS (Not In 4th),
/*ylabel                    =MPH,
/*yaxis                     =   12   20   28   36   44   52   60   68   76   84   92  100,
/*xlabel                    =% TPS,
/*xaxis                     =,,
};

/* Table 24: TCC Lock Speed Vs. %TPS (Not In 4th) */
{
/*startAddr                 =2B4,
/*columns                   =1,
/*rows                      =12,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.390625,
/*map_name                  =TCC Lock Speed Vs. %TPS (Not In 4th),
/*ylabel                    =MPH,
/*yaxis                     =   12   20   28   36   44   52   60   68   76   84   92  100,
/*xlabel                    =% TPS,
/*xaxis                     =,,
};

/* Table 25: TCC Unlock Speed Vs. %TPS (In 4th) */
{
/*startAddr                 =2C1,
/*columns                   =1,
/*rows                      =12,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.390625,
/*map_name                  =TCC Unlock Speed Vs. %TPS (In 4th),
/*ylabel                    =MPH,
/*yaxis                     =   12   20   28   36   44   52   60   68   76   84   92  100,
/*xlabel                    =% TPS,
/*xaxis                     =,,
};

/* Table 26: TCC Lock Speed Vs. %TPS (In 4th) */
{
/*startAddr                 =2CE,
/*columns                   =1,
/*rows                      =12,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.390625,
/*map_name                  =TCC Lock Speed Vs. %TPS (In 4th),
/*ylabel                    =MPH,
/*yaxis                     =   12   20   28   36   44   52   60   68   76   84   92  100,
/*xlabel                    =% TPS,
/*xaxis                     =,,
};

/* Table 27: No. of Accel Enrich Async Pulses Vs. Coolant Temp. */
{
/*startAddr                 =324,
/*columns                   =1,
/*rows                      =9,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =1.000000,
/*map_name                  =No. of Accel Enrich Async Pulses Vs. Coolant Temp.,
/*ylabel                    =Deg. C,
/*yaxis                     =  -40  -16    8   32   56   80  104  128  152,
/*xlabel                    =# pulses,
/*xaxis                     =,,
};

/* Table 28: Accel. Enrich %BPW Factor Vs Async Pulse */
{
/*startAddr                 =31B,
/*columns                   =1,
/*rows                      =8,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.015625,
/*map_name                  =Accel. Enrich %BPW Factor Vs Async Pulse,
/*ylabel                    =Pulse,
/*yaxis                     =  1    2    3    4    5    6    7    8,
/*xlabel                    =Factor,
/*xaxis                     =,,
};

/* Table 29: LV8 Accel. Enrich. Factor Vs. Delta LV8 */
{
/*startAddr                 =344,
/*columns                   =1,
/*rows                      =5,
/*elementSize               =1,
/*bitMask                   =0,
/*offset                    =0.000000,
/*mulOrDivOrBit             =0,
/*factor                    =0.003906,
/*map_name                  =LV8 Accel. Enrich. Factor Vs. Delta LV8,
/*ylabel                    =LV8 counts,
/*yaxis                     =   0   64  128  192  256,
/*xlabel                    =multiplier,
/*xaxis                     =,,
};